Making soap with kefir, is just like making soap with any other type of milk or alternative liquid.
Kefir is a cultured, fermented beverage that tastes a bit like yogurt. You can buy it at the store or make it yourself. Kefir has a ton of health benefits, including probiotics to support a healthy digestive and immune system! What exactly does kefir lend to soap? Well, the probiotics aren’t going to do anything in your soap. It is mostly for label appeal, and similar to regular milk, it will add a bit of sugar to boost lather. Kefir lovers will love the idea of bathing with their favorite drink! 🙂
I like adding carrots for color. You can puree your own cooked carrots or you can simply use a jar of carrot baby food. Just make sure the label says carrots and water only.
This recipe uses the Milk in Oil method of making milk soap. I go over that in detail in Goat Milk Soapmaking.
Kefir and Carrot Soap Recipe
- Coconut Oil – 270 grams
- Shea Butter – 180 grams
- Olive Oil – 315 grams
- Rice Bran Oil – 135 grams
- Sodium Hydroxide – 126 grams
- Water – 150 grams
- Ground Oats – 1 teaspoon
- Illite Pumpkin Clay – 1 teaspoon
- Kefir – 50 grams
- Pureed Carrots – 50 grams
Essential Oil Blend
- Peppermint EO – 5 grams
- Cedarwood EO – 5 grams
- Spearmint EO – 5 grams
- Orange EO – 15 grams
Safety: Gear up in your goggles and gloves to make soap.
Step 1: Create a lye solution. Weigh the water and lye into two separate containers. Slowly pour the sodium hydroxide into the water while stirring. Stir until completely dissolved and set aside to cool.
NOTE: When creating a super concentrated lye solution, you might notice a film of white floating on top. This is sodium carbonate (some soapers call it lye lint). It happens when the lye solution is exposed to air. Simply mix it up and you can still use it. It is not undissolved lye as some soapers think.
Step 2: Prepare the base oils. First, weigh any solid oils and butters into a container and melt. You can melt using the microwave or low heat on a burner. Next, weigh each liquid oil (if any) into the melted oils.
Step 3: Prepare your molds if needed. I used a 8″ Silicone Loaf mold from Wholesale Supplies Plus. I usually use a 10″ silicone loaf mold, but I wanted to pipe the soap and have it pile up above the mold height.
Step 4: Check the temperatures. You should now have a container containing liquid base oils and a container containing lye solution. Take the temperatures using an infra-red temperature gun. Be sure to stir each mixture before taking the temp. You want your temperatures to be between 80-100 degrees F.
Step 5: Weigh your essential oils into a glass or stainless steel container and add to your prepared base oils.
Step 6: Add your kefir, carrots and oatmeal to prepared oils. The kefir will bead up and stay separated. This is normal.
Prepare your piping bag with a 1M piping tip.
Step 7: Pour your lye solution into prepared base oils and mix until thick trace trace.
Step 8: Pour (or glop) 3/4 of your soap into your mold! You want to leave about 1/2 an inch at the top for piping.
Step 9: Add orange clay to your batter and mix until thick trace. Piping is all about getting your mixture to the right consistency. You want to be able to tease your soap into a little peak and have it stay. If it slumps, your piping will slump as well.
Step 10: Once your soap has thickened (you can mix a little more and let it sit and thicken), put it into a prepared piping bag. I used a 1M cupcake piping tip.
Step 11: Pipe onto your soap in blobs going across the width! There isn’t really a wrong or right way. I did little rows of 3-4. Then I went back again and did 2 blobs on top of each row and then 1 to build it up into a peak.
I sprinkled a little ground oatmeal on top.
Step 12: Allow your soap to saponify and harden for 24 hours. Unmold and cut!
Step 13: Cure for a minimum of 4-6 weeks.
For more milk soap recipes, be sure to check out Goat Milk Soapmaking!
Thanks for being a part of the Lovin’ Soap community! We’re so glad you’re here!
Now through March 1st, we are having a presale on our newest eClass, Clear Transparent Soap from Scratch!
In this video eCourse, I will show you:
- How to formulate your own transparent soap recipe that is remelt-able and reusable…similar to MP soap base.
- We’ll go over base oils and solvents that are available to use and why you would select each type of ingredient.
- How to make quick hot process transparent soap from scratch. It only takes about 20 minutes once you get the process down!
- How to remelt and use your base for future projects.
About the soap:
- The ingredients we use include coconut oil, stearic acid, castor oil, sodium hydroxide, everclear (grain alcohol) and sugar.
- The soap is remeltable and you can work with it like melt and pour soap base.
- You can create bars of soap or embeds that you can add to regular cold process soap.
- You’ll get different varieties of clarity in your soap…we’ll talk about that.
The class will be delivered in a a series of videos and downloadable PDF’s. You’ll have forever access and be able to watch over and over again as you want.
Happy Soaping! -Amanda Aaron