This design tutorial is from my new soapmaking book, The Complete Guide to Natural Soapmaking. You can find it on Amazon in both print and for Kindle.
Turmeric is an easy natural colorant for a yellow or bright orange soap, and it pairs well with lemon essential oil. Turmeric is used in India to treat troublesome skin. This bright essential oil blend matches the vibrant coloring.
Yield: 1,284 grams | 10 bars (128 grams each)
Start to Finish Time: 1 hour to create soap, 24 to 48 hours to saponify, 4 weeks to cure
Lye Discount: 5%
Safety First: Remember to wear goggles and gloves. Mix the lye solution in a well-ventilated area with access to a sink for flushing with water if necessary. Keep your workspace free from distractions, small children, and pets.
- Digital scale
- Stick blender
- Dry lye container
- Lye solution container
- Batch container (microwave-safe)
- 2 mixing containers
- Glass container
- Infrared thermometer gun (optional)
- Silicone spatulas
- 10-inch silicone loaf mold
- Measuring spoons
Base Oils (900 grams)
- Coconut oil, 76 deg – 270 grams (30%)
- Mango butter – 90 grams (10%)
- Olive oil – 405 grams (45%)
- Apricot kernel oil – 135 grams (15%)
- Sodium hydroxide – 128 grams
- Distilled water – 256 grams
- Lemon essential oil – 30 grams
- Litsea essential oil – 15 grams
- Zinc oxide – 2 tablespoons
- Turmeric powder – 1 tablespoon
- Annatto seed powder – 1 tablespoon
Prep ahead: Weigh the essential oils into a glass container; blend together.
Step 1: Weigh the water into your lye solution container.
Step 2: Weigh the sodium hydroxide into your dry lye container.
Step 3: Following safety precautions, pour the sodium hydroxide into the water while stirring. Turn your head and lean away from the lye solution. Stir until all the granules have dissolved. Set aside to cool.
Step 4: Weigh and melt the solid oils and butters.
Step 5: Weigh the liquid oils into the melted oils and butters.
Step 6: Add your essential oils to the prepared base oils and blend.
Step 7: Check the temperature of your base oil mixture and lye solution. For a swirled soap, a good range for both mixtures is between 80°F and 90°F.
Step 8: Pour the lye solution into your melted oils and mix to emulsion or light trace.
Step 9: Divide your soap into three containers to color. For this design, I pour a quarter of the mixture into one container, a quarter into another, and then leave the rest in the main mixing container as the base.
Step 10: Add the zinc oxide to the base, the turmeric powder to one container, and the annatto seed powder to the last container; blend well.
Step 11: Using the in-the-pot swirl technique (see video), pour the turmeric and annatto soap bases back into the zinc-colored soap, rotating through each color at least 3 times. Use a small silicone spatula to give the soap one swirl in the pot.
Step 12: Pour the soap into your mold. It will swirl more as you pour.
Step 13: Use a skewer to swirl the very top of the soap.
Step 14: Allow the soap to saponify for 24 to 48 hours.
Step 15: Unmold your soap, cut into bars, and allow to cure in a cool, dry space for at least four weeks.
Tip: When you’re creating a swirl, don’t overmix your soap. Stop mixing when you get a stable emulsion to give yourself time to divide and color your soap. By the time you pour your soap to swirl, it should be at light to medium trace.
Thanks for being a part of the Lovin’ Soap community! We’re so glad you’re here!
Now through March 1st, we are having a presale on our newest eClass, Clear Transparent Soap from Scratch!
In this video eCourse, I will show you:
- How to formulate your own transparent soap recipe that is remelt-able and reusable…similar to MP soap base.
- We’ll go over base oils and solvents that are available to use and why you would select each type of ingredient.
- How to make quick hot process transparent soap from scratch. It only takes about 20 minutes once you get the process down!
- How to remelt and use your base for future projects.
About the soap:
- The ingredients we use include coconut oil, stearic acid, castor oil, sodium hydroxide, everclear (grain alcohol) and sugar.
- The soap is remeltable and you can work with it like melt and pour soap base.
- You can create bars of soap or embeds that you can add to regular cold process soap.
- You’ll get different varieties of clarity in your soap…we’ll talk about that.
The class will be delivered in a a series of videos and downloadable PDF’s. You’ll have forever access and be able to watch over and over again as you want.
Happy Soaping! -Amanda Aaron